Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: Pedro on 2011-10-21, 00:19:00

Title: net framework 4
Post by: Pedro on 2011-10-21, 00:19:00

Hi,

after installing NET FRAMEWORK 4. in order to run RRC-micro I got problems with other radio aplications like Microham USB Device Router. After installing the Framework the USB router just not get loaded and I need to force it to close. My OS is win 7.

Wonder if anyone noticed such problems or if there's a way to try to find out what's causing that problem.

Thanks in advance,
Pedro

Title: Re: net framework 4
Post by: ON4AOI on 2011-10-25, 19:31:05

Hi Pedro,
no problems here with Net Framework 4 , microham USB device router 7.7.1
on win7, vista 32 and 64 bit

try to uninstall and reinstall it, afterwards start the device router with admin priveleges
this might help

Guy ON4AOI

Title: Re: net framework 4
Post by: Pedro on 2011-11-01, 18:54:12

Hi Guy,

thanks for your post!

After getting arround and arround I find out that the problem occurs after installing the RRC-Micro PC Client. So, I unistalled this software and the MicroHam router gets back to normal and in this case the Framework 4.0 is kept installed.

In the begining I thougth that the problem was the Framework because When you first install the RRC-Micro PC Client it just ask you to install the Net Framework 4 so it lead me to assume that was the issue.

Dou you have the RRC-Micro PC Client installed on your computer and running the MircroHAm router?

Thanks,
Pedro