Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: WB4LCN on 2012-01-31, 19:42:27

Title: RESOLVED - Power on/off 120 VAC - Will this work?
Post by: WB4LCN on 2012-01-31, 19:42:27

Will this work with a RemoteRig boxes from computer to this web controlled power switch, or do I need the RemoteRig boxes and just run it on computer over the Internet?

http://www.digital-loggers.com/epcr3spec.pdf (http://www.digital-loggers.com/epcr3spec.pdf)

Title: Re: Power on/off 120 VAC - Will this work?
Post by: dj0qn on 2012-01-31, 20:04:23

Neither. It runs stand-alone with its own web interface. All you do is to plug it into
your router/switch and set it up. You start a browser to access it.

This one seems very much like overkill, there are for sure smaller, cheaper IP based
power outlets on the market. I don't know the U.S. market, but I have put several of
these into operation: http://www.koukaam.se/products.php?cat_id=19
They cost less than 100 Euros with VAT over here.

73,
Mitch DJ0QN / K7DX

Title: Re: Power on/off 120 VAC - Will this work?
Post by: WB4LCN on 2012-02-01, 01:17:09

Great! They have a US website too. Thanks Mitch. ;)

Title: Re: RESOLVED - Power on/off 120 VAC - Will this work?
Post by: PY1KN on 2012-02-02, 18:53:38

Another option:

Do a search on IP-9258. They are easy to find on ebay, and there are US and European outlet models.

It is web based. That's the one I use

Marcelo, PY1KN