Remote Rig

Webswitch 1216H Support in English => General discussion forum => Topic started by: sv1elf on 2012-02-29, 08:42:14

Title: State contacts of web switch
Post by: sv1elf on 2012-02-29, 08:42:14

Hi
I wonder if in any older vercion there's a possibility
or its regular , the contacts state return to off  state after
(12v) power loose.(in case that you loose and internet and you
don't have communication to control the web switch).
Thanks
de sv1elf
George

Title: Re: State contacts of web switch
Post by: sm2o on 2012-02-29, 08:50:29

Hi

When powering up the relay ouputs will return to the same state as before the 12V was lost. If the Internet fails the relays does not change

73 de mike

Title: Re: State contacts of web switch
Post by: sv1elf on 2012-03-01, 14:50:45

Thats i say , but is it possible to return to normaly "off" state?
Lets say that we power on two contacts and we loose power and internet,
when the power come back but not the internet  we will have two contacts on
that we can't control them.
Is it possible this to change or is regular in any vercion ?
Thanks
George