Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: I4GAD Enrico on 2012-04-24, 08:23:21

Title: FSK audio monitoring
Post by: I4GAD Enrico on 2012-04-24, 08:23:21

Since the firmware rel. 2.46 the fix  Speaker is now not muted when sending RTTY makes it possible to hear the RTTY-sidetone from the Radio should be available, but after the firmware update (now to 2.55), when I send FSK message still no audio is heard.
Does any thing wrong on my side ?
Enrico I4GAD

Title: Re: FSK audio monitoring
Post by: sm2o on 2012-04-24, 09:13:06

I used RTTY yesterday myself and the side tone is there. Have you enabled "Continuous RTP tx" in the Radio RRC I think it need to be set to YES so the audio will not be muted when PTT is "pressed" by the RTTY program.

73 de mike

Title: Re: FSK audio monitoring
Post by: I4GAD Enrico on 2012-04-24, 11:37:07

Yes Mike, you are absolutelly right. In my RRC boxes "Continuous TPT tx" it is set off. Later on I'll set it properly and will make the test. I'll let you know....

Thanks for the help.
73 Enrico

Title: Re: FSK audio monitoring
Post by: IN3ASW on 2018-10-07, 19:17:04

HI All,

I want to mute , or at least lower at minimum ,  the RTTY sidetone when  transmitting in FSK.
I tried various combinations of these settings :
- RTP tx mode
- Disable Audio tones
- Audio tones (level)
- Full duplex
on the control side, but no luck..

regards