Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: LB9GE on 2012-05-13, 20:58:35

Title: ARCP-2000 Broke with 1.5.3
Post by: LB9GE on 2012-05-13, 20:58:35

Hi. I just installed the 1.5.3, and i could not get ARCP-2000 to work anymore. The connect button in ARCP blinke once, but give up and cant connect. should be steady lit. I then rolled back and installed 1.5.2, and it worked again.

73 de LB9GE Trond

Title: Re: ARCP-2000 Broke with 1.5.3
Post by: roland on 2012-05-14, 08:49:03

I will test and see whats going on if I can get hold of an TS-2000 or anyone that can open a connection for me to test on.

Title: Re: ARCP-2000 Broke with 1.5.3
Post by: LB9GE on 2012-05-14, 18:05:03

PM sent to Roland for TS-2000 to test
:-)

73 de LB9GE Trond

Title: Re: ARCP-2000 Broke with 1.5.3
Post by: KP4TR on 2012-05-18, 02:52:15

I had same issue, but didn't test again. Thought it may be a setup issue.

Title: Re: ARCP-2000 Broke with 1.5.3
Post by: LB9GE on 2012-05-18, 10:20:44

Work in progress, Roland tested and will look further into the problem.

73
de LB9GE