Remote Rig
RRC-Micro PC Client in English => General discussion => Topic started by: DF1NP on 2012-10-21, 21:53:33
-
Hallo,
Are the softwares ARCP 2000 for TS 2000 and Easy Rotor Control (ERC) actually working?
Perhaps someone testet.
73
Willi
-
Hey,
Does really nobody use ARCP 2000 or Easy Rotor Control together with RRC-Micro PC?
I tried all COM`s and modes, bauds. HRD is working on COM 2 and mode 4; but not ARCP 2000. Connect-button at the display is lightning yellow for 1 sec., then goes dark.
ERC works fine with my 2 x 1258MKII but not with RRc-Micro PC.
Any ideas?
73
Willi