Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: W4TO on 2012-10-31, 22:47:05

Title: Elecraft Twins K3/0 and K3100
Post by: W4TO on 2012-10-31, 22:47:05
I have the two connected on my LAN. The K3/0 controls the K3 ok except there is no audio passing between the K3/0 and the K3. CW and other commands seem to work OK. Any help would be gratefull.
Title: Re: Elecraft Twins K3/0 and K3100
Post by: dj0qn on 2012-11-01, 00:40:46
Have you checked to make sure that you have it wired correctly per the manual at:
http://www.elecraft.com/manual/K3_Remote_Owner_Manual_Rev_A.pdf

Important is the RJ45 cable between the AUX/MIC and K3 & K3/0 as on page 12 and 13.

The rear input needs to be selected in the radio's menu.

If this is still not working, let us know.

BTW, this was posted on teh wrong section, as this has nothing to do with the Micro PC Client.

73,
Mitch DJ0QN / K7DX