Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: OH6KVP on 2010-03-16, 10:30:40

Title: TS-2000 Control RRC and Signalink USB
Post by: OH6KVP on 2010-03-16, 10:30:40

Hello everyone.
I have a Kenwood TS-2000 without the RC-2000.
Does any idea how to connect the USB Signalink to Control RRC.
There is not spkr connection in aux/mic (RJ45).
Or is there something other way to work  digimodes remotely?

Best 73 de OH6KVP Sami

Title: Re: TS-2000 Control RRC and Signalink USB
Post by: sm2o on 2010-03-16, 11:05:06

Hi

There is a speaker out in the jumper socket. Look at the IC-706 page http://www.remoterig.com/en/ic706anp.htm. Just add an red jumper wire to the connector pin number you want

73 de mike

Title: Re: TS-2000 Control RRC and Signalink USB
Post by: OH6KVP on 2010-03-23, 09:21:57

Thanks Mike.
It is working perfectly. I had just switch jumper 2 in signalink, so I got more volume.
CW keying via USB is working too with HRD+DM780.
Sometimes a virtual serial port, however, doesn't work...
Reboot the computer helps, but it is not so fun :(

73 de OH6KVP Sami