Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: DL5FAB on 2010-04-05, 14:32:04

Title: DynDNS
Post by: DL5FAB on 2010-04-05, 14:32:04

Hi,

I have tried to use the DynDNS Client in the Controller configured as follows:

DynDNS Check Interval: 10
DynDNS Host Name: www.dyndns.com
IP check Host Name: checkip.dyndns.com:8245/ (to bypass proxies)
Own Host Name: xxx.dynxxx.net
Username: as registered in DynDNS
Password: as registered in DynDNS

The DynDNS Client appears not to work or is for whatever reason not reaching DynDNS.

DynDNS works fine for all my other domains and it works for the domain with the Controller when I activate the DynDNS Client on the Router instead of the Controller connecting via UMTS to the Internet. I can check the up-dates being performed on the Host-Lists of DynDNS, which appear as soon as UMTS assigns a new dynamic IP adress.

What could go wrong here?

Title: Re: DynDNS
Post by: sm2o on 2010-04-05, 18:17:57

Hi

"DynDNS host name" should always be members.dyndns.or

Qouting DynDNS website"

"All requests should be sent to members.dyndns.org. Hard coding the IP address is not acceptable as the IP address may change."

73 de mike

Title: Re: DynDNS
Post by: DL5FAB on 2010-04-14, 00:11:40

Will try this out but would need to apply for a new domain name which is presently member.dynalias.net

Title: Re: DynDNS
Post by: va7awm on 2010-07-02, 18:54:06

I just received an 5-day expiration notice from DynDNS, so apparently my remote is not renewing. Here is a copy of my remote settings:

DynDNS settings 
DynDNS check interval   60
Own host name   va7xxx.xxx.net as registered
Username   as registered
Password   as registered

I have nothing to change on this screen to correct any problem. My remote is at a DMZ location on the lan.

I just signed into DynDNS and my username/password and DNS/IP address are all correct with them.

Tnx, Alan VA7AWM

Title: Re: DynDNS
Post by: sm2o on 2010-07-03, 21:14:51

Hi

Not much can go wrong. If the DynDNS settings are ok the only other thing that can be wrong is if you have not set the DNS address ok at the IP-settings. With the latest firmware you can see the DynDNS status on the status page.

73 de mike

Title: Re: DynDNS
Post by: va7awm on 2010-07-04, 02:53:53

Hi Mike,

Alan VA7AWM here. Tnx. I will paste my Remote Status. Looks OK. Will await the next 30-day expiration notice from DynDNS and get back to you then if required. 73

Status
Name   Value
Radio   ON
SIP status   Connected/transfering
Last SIP error   None
RTP Timeout   59
SIP Timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
External IP   96.50.46.2xx
SIP Out port   5060
SIP In port   5060
Audio Out port   11000
Audio In port   11000
Command Out port   12000
Command In port   12000
External SIP In port   5060
External Audio In port   11000
External Cmd In port   12000
Other party   24.69.117.xxx
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
DynDns status   OK