Remote Rig
RRC-Micro PC Client in English => General discussion => Topic started by: ON4AOI on 2013-09-24, 17:42:51
-
Hi All,
the new RRC-1258.bin file is working OK , it only needs to be uploaded in the radio box
make sure you have a CIV connection with ttl to RS232 converter between com2 on the radio box
the rest is show in picture below
GUY ON4AOI-OT7K
-
I have 2.74 installed on Radio RRC. When I connect with Micro RRC Client, it connects, but no audio is heard. When I connect with the control head from the Control RRC, all is ok.
Micro RRC is working fine with other radios I have set up. Any idea why no audio from the 7100 to the Micro Client?
Charlie KB8CR
-
Yes charlie,
the audio doesn't start after you connect with RRC CLIENT (only)
untill you connect with RS-BA1 or HRD via the serial port
once that is running you have audio
Guy ON4AOi
-
Charlie,
forgot to tell to select IC-7000 in HRD and change address to 88(IC7100) instead of 70(IC7000)
Guy ON4AOI
-
That explains it. Thanks. I'll order a Serial CI-V cable.
Charlie KB8CR
-
The cables for sale on eBay apparently have the level translation in the DB9 connector. Does COM2 on the RRC provide voltage to power that (RTS/CTS)?
-
Does COM2 on the RRC provide voltage to power that (RTS/CTS)?
No they don't have power supply on it , thats why I made the drawing
Guy ON4AOI
-
I found a source for a RS232 to TTL board that has inputs for VCC, so guess I'll get that a build a cable. Thanks for the advice.
Charlie KB8CR
-
Ok Charlie,
on my drawing are 2 listed that I tested out
Guy ON4AOI
-
Thanks, Guy. I found the Artekit site on the internet and ordered their board. I liked how it fits in a shell for the DB9. Might take a while to come to US from Italy, but I can wait. I'll put a 5v line to it and the cable to the radio.
Charlie KB8CR
-
Guy, thanks for your help. Just got the RS232-TTL converter, and made a cable and it works FB !!
Charlie KB8CR
-
Ok Charlie
glad to hear that
Guy ON4AOI