Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: 4Z4OQ on 2014-07-09, 09:28:07

Title: Aux/Mic & RFI..
Post by: 4Z4OQ on 2014-07-09, 09:28:07

Hi

I am building a multi audio input source connection into the RRC (using TS-480). I will have 4 inputs:
Hand-Mic, boom mic, headset mic and computer audio for PSK. All will go into a Behringer audio mixer so I can control the gain, high, mid and low levels.
The Behringer output will be connected to the rrc aux/mic jack
In the RRC Manuel page 177  I can see two options of the AUX/MIC  connections. Option 1 is connecting pin 3&4 and option 2 is connecting 3&6. It also mentioned that both will work but I can have RFI issues,

What I don’t understand is how can I get RFI issues if there is no RF in the shake but only at the radion site…
Can someone highlight this point to me.

Ziv

Title: Re: Aux/Mic & RFI..
Post by: sm2o on 2014-07-09, 09:36:07

The RFI issue is of course reffering to the radio side

/mike

Title: Re: Aux/Mic & RFI..
Post by: 4Z4OQ on 2014-07-09, 11:10:01

Mike, thanks for prompt reply. So both options will work fine with no RFI issue?

Title: Re: Aux/Mic & RFI..
Post by: sm2o on 2014-07-09, 17:06:09

Yes as you say, how could it be RFI problams at control side.

/mike