Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: sv1oz on 2014-07-11, 07:12:59
-
Hello,
I have a problem the last two days with my remote rig Kenwood TM-V71
When I turn on the radio it turns on and I have control of it for 5-7 seconds.
After that all controls freeze but display keeps on (light,display and also sound),but no further control is possible.
In two minutes I have an audio alarm that connection failed and then display- Radio shuts down.
In status menu if I check locally I can see a SIP error instead of connected or some times "connection failed".
In the beginning it shows "connected" but after a while when freezes shows "sip error"
I tried to restart router and change lan ports but nothing.
Every time I turn ON it has always same result
Any idea ?
73 de
Dimitris SV1OZ
-
If you get SIP-error then you have some trouble with your Internet connections or routers, nothing that the RRCs can do about it
73 de mike
-
Hi Mike,
I have checked and restarted both routers but the issue still is there.
When I turn On the rig it works perfect for 5 seconds and then freezes.
No control is possible, the display is ON and voice is still working (transferring)
In a few seconds have the sound of disconnection and the rig shuts down.
Here is the status before the rig freeze:
Control panel ON
Radio ON
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(43)
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
Current audio packet size 20
Current audio quality 2 - Linear 16 bits 8 kHz
SIP Out port 5062
SIP In port 5062
Audio Out port 11000
Audio In port 11000
Command Out port 12200
Command In port 12200
External SIP In port 5062
External Audio In port 11000
External Cmd In port 12200
Other party 79.131.28.207
Input 0 High
Input 1 High
Input 2 High
Output 0 High
Output 1 Low
Output 2 Low
DNS status OK, lxfeudnz.ddns.remoterig.com = 79.131.28.207
Active profile: Default
PTT status: OFF
and here is after the rig freezes:
Control panel ON
Radio OFF
Connection status Disconnected
SIP status Error
Last SIP error SIP Error
RTP/UDP audio status Disconnected
UDP cmd status Disconnected
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
SIP Out port 5062
SIP In port 5062
Audio Out port 11000
Audio In port 11000
Command Out port 12200
Command In port 12200
External SIP In port 5062
External Audio In port 11000
External Cmd In port 12200
Other party 79.131.28.207
Input 0 High
Input 1 High
Input 2 High
Output 0 High
Output 1 Low
Output 2 Low
DNS status OK, lxfeudnz.ddns.remoterig.com = 79.131.28.207
Active profile: Default
PTT status: OFF
It seems that both routers run ok as the internet is working ok on both of them.
Can you please advise what else to check as this issue getting me crazy and really don't know what to do
73
Dimitris
-
After visiting remote site I managed to restart the remote interface and everything worked as before.
Thank you everybody for your time
73
de Dimitris SV1OZ