Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: LA7THA on 2014-12-19, 23:35:35

Title: CW from RRC Micro
Post by: LA7THA on 2014-12-19, 23:35:35
Hi All,

I was told that CW function in RRC Micro was using the side tone from Radio, not produced in RRC Micro dongle.
I have listening to myself via web SDR and can hear that I send cw as normal. I have checked side tone in radio and all is ok. I am still not able to hear any side tone when sending cw.

I try to use ARCP 480 software from Kenwood, when using this software there is also a cw function via Keyboard. When I use this software I can hear my side tone as normal and i also send cw out as normal. Is there anyone else that has seen the same problem? is thre anything else i have done wrong. Using W7 64 bit system and RRC Micro Client 1.6.12BETA2.

73 Rune LA7THA
Title: Re: CW from RRC Micro
Post by: LA7THA on 2014-12-26, 14:52:28
Hi All

It all worked fine when using ARCP 480, but when sending CW from RRC Micro I could not hear CW side tone. I found the “problem”, TX Monitor is one thing but if RTP TX mode in Radio RRC is not set to Continuous I was not able hear the generated CW in Radio. Now all is nice and pretty  ;)  I have to say thanks to my friend LA9KKA that pointed me that way.

73 Merry –Xmas, Rune LA7THA