Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: w8bnl on 2015-01-01, 03:10:21
-
From what I read so far in the manual - the default IP config for these units is 192.168.0.227 - - 228.
My home network (which will be the remote connect location) has a 192.168.2.x configuration.
My son's house (where I plan to have the antenna & radio body) has a network configured as 192.168.1.x.
Do I set up both units to work on my son's network IP range or mine? I will be using my TS-480sat for the remote.
Thanks in advance & 73 de w8BNL - Tom
-
Tom,
Drop me a mail at dj0qn (at) darc.de and I will send you my checklist that walks you through
the network installation process and will answer all of your questions.
73,
Mitch DJ0QN / K7DX