Remote Rig

Webswitch 1216H Support in English => Configuration, Webswitch 1216H => Topic started by: hughbradley on 2015-04-21, 23:14:07

Title: Accessing 1216h
Post by: hughbradley on 2015-04-21, 23:14:07

Here is a pretty basic question.
I have set up my 1216h, given it port 8001 on the router. I have a fixed IP address.
How do I access the 1216 remotely?
What address do I enter into my browser to get in? This is not mentioned in the documentation.
Thanks
Hugh EI9KF

Title: Re: Accessing 1216h
Post by: dj0qn on 2015-04-22, 00:46:39

Hugh,

Drop me a mail at dj0qn (at) darc.de and I will send you my networking checklist that walks you through the
process. It was written for the RRC's, but the networking part is the same.

73,
Mitch DJ0QN / K7DX

Title: Re: Accessing 1216h
Post by: W5RF on 2015-09-08, 02:15:11

I had the same question... not getting into it. My RRC is working well through the static IP and I have port forwarded the 192.168.1.142 which is what I have assigned the web switch.. got your notes, will re review them

bobf