Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: PA0TCA on 2010-08-23, 19:50:12
-
my setup is relay1 for 01,3A,7A, relay 2 18,24 and relay 4 50
when switched via icom 1,8 and 3.5 is okay but 7 mhz (7A) will switch on relay 4 (=50mhz). relay 2 18 will switch on relay 2 but 24 will switch on relay 4 (=50mhz)
relay 4 will switch on when the Icom is on 50mhz.
Relay switching via webbrowser is no problem, but like to use the webswitch via icom ci-v protocol, not using the webbrowser/access.
-
Hi
I also find some problems here, we will look into it ASAP
73 de mike
-
Hi
We have fixed this issue, please download the software v1.8
73 de mike