Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: g4gwc on 2015-06-01, 12:18:31

Title: Using remote rig with UHF or VHF
Post by: g4gwc on 2015-06-01, 12:18:31
I would like to remote-rig my IC 7100 using a radio link instead of the internet or wifi
any ideas on how to proceed, a 2m or 70cms link with just enough bandwidth for full remote and voice.

Regards

Ron

G4GWC
Title: Re: Using remote rig with UHF or VHF
Post by: sm2o on 2015-06-01, 19:39:31
I have never heard of such links for 2m or 70 cm. 5 GHz links is cheap and reliable.

73 de micke
Title: Re: Using remote rig with UHF or VHF
Post by: dj0qn on 2015-06-01, 20:19:09
I have done this using WiFi at 5 GHz using Ubiquity Bullets https://www.ubnt.com/airmax/bulletm/
which allow nearly 50 KM using high power Bullets attached to high-gain antennas. If a shorter
distance is required, a solution such as the Nanostation https://www.ubnt.com/airmax/nanostationm/ would be sufficient.

73,
Mitch DJ0QN / K7DX