Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: guanaco on 2015-10-04, 14:01:21

Title: UDP cmd status error on control RRC
Post by: guanaco on 2015-10-04, 14:01:21
Hi,

I'm not able to use my remote setup anymore. I hear some popping sound on the radio side, but the screen doesn't work.
Status on the control RRC is:
Control panel   ON
Radio   ON
Connection status   Faulty(See below)
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   Error(0)
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
Current audio packet size   20
...
DNS status OK

on the Radio RRC status looks ok:
Radio   ON
Connection status   OK
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   OK(45)
SIP command timeout   0
Rx Jitter buffer size   7
Rx Jitter delay   6
Dual Rx   0
Current audio packet size   20

Since I only see some error message on the control part, I guess this side is somewhat suspicious.
I'm using a TS480.

what does "UDP cmd status   Error(0)" on the control side actually mean?
It seems connection is ok, except for the UDP cmd?!? part.

Please help

Thanks!
Johan.
Title: Re: UDP cmd status error on control RRC
Post by: sm2o on 2015-10-05, 09:09:14
Something between the RRCs is blocking the cmd port, try to restart the routers in both ends

73 de mike
Title: Re: UDP cmd status error on control RRC
Post by: guanaco on 2015-10-09, 19:10:51
it's really strange.. It worked ok for the first year or so, but now I always need to restart my remote router 1 time!
maybe time to replace the router..