Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: LA7THA on 2010-10-07, 13:40:02
-
Hi
We are three users on the remoterig system here.
Radio RRC settings are Programmode 4 Generric for use whit HRD, and Programmode 5
TS480 for remotehead use.
When i use the system using HRD or TRX-Manager all is ok, Programe mode 4 in Control end and Radio end. When my friend try to use the system using the Dispaly/Remotehead we cant get it to work. We change the setting in Radio RRC and Control RRC to programode 5. Baudrate in Control end is also 57600, and controlpanel settings to YES.
When he press the ON buton on remotehead we get the yellow SIP connection but
Radio/Display do not turn ON. using Hardware 3, software version 0.0.2.7 Build Feb 18 2010
Any sugestion here.
73 Rune LA7THA
-
Why using 8 month old software. Update to latest version first and try again.
I use it the ssame way my self and it's no problem
73 de mike
-
Hi
New firmware in all RRC Boxes, latest version.
Still ok using HRD/TRX-Manager but when using Remotehead we get the yellow LED SIP connection but Display dont turn ON.
If there was someting wrong whit cable i would not get the SIP connection ? or ?
And it also work ok using HRD/TRX-Manager
73 Rune LA7THA