Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: pd0swl on 2010-10-10, 15:12:35

Title: Remoterig IC-R2500 working yes/no ?
Post by: pd0swl on 2010-10-10, 15:12:35

I see several remarks in this forum that the Icom R2500 is not working correctly with Remoterig.
(some of them unfortunately in Swedish ;-)
Before making cables, could anyone shed a light?
Is the R2500 working if connected by the RRC manual?

73
Paul
PD0PSB

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: sm2o on 2010-10-10, 20:24:09

Hi

whats the problem with IC-R2500 ?

I have one my self and it works as far as I know , at least the functions I have used?


73 de mike

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: pd0swl on 2010-10-10, 20:53:10

Hi Mike,

There is an "Ubbe" in the Swedish section of this forum saying you shouldn't use the TTL port but the AUX/MIC port instead.
And there is a Greek user also saying to have problems , with the on/off switch?

But if you have a R2500 yourself and working via TTL, I'll start making cables :-)
IC703 works fb...

73
Paul
PD0PSB

Title: Re: Remoterig IC-R2500 working yes/no ? >> not working
Post by: pd0swl on 2010-10-16, 16:37:24

Hello Mike,

I connected the R2500 as per the manual, but the R2500 will not power up.
This is also what Ubbe stated in the past, but it is unclear what the solution is.
I don't understand the alternative cabling via the AUX/MIC bus.

He said RRC MK1 did work but MK2 doesn't work over the TTL ports.

73
Paul
PD0PSB

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: sm2o on 2010-10-19, 16:57:15

Hi

I must have forgot to update the website when I tested IC-R2500 almost a year ago.

Now I have done it today. The picture is still the old one but the drawings and strappings are OK

73 de mike

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: pd0swl on 2010-10-19, 17:56:13

Okay Mike,

Ubbe has mailed me the workaround using the R2500 via the AUX/MIC bus on pin 2/7.
That should work.

With TTL connections in the diagram R2500 doesn't power up.

73
Paul
PD0PSB

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: sm2o on 2010-10-19, 18:23:19

No

as the drawings shows the cables should be connected to the AUX/MIC with a RJ45 connector

73 de mike

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: pd0swl on 2010-10-19, 20:58:11

But Mike,
The drawings show 6pin-to-6pin, not RJ45 (8pin) !
I'm getting more and more lost here :-)
73
Paul
PD0PSB

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: sm2o on 2010-10-19, 21:03:33

I think you need to empty your cache you are looking at the old pages

73 de mike

Title: Re: Remoterig IC-R2500 working yes/no ?
Post by: pd0swl on 2010-10-19, 21:09:46

Aarrrghhh!

Face turned red now....

Thanks!

Paul