Remote Rig
Webswitch 1216H Support in English => General discussion forum => Topic started by: PA8F on 2015-12-04, 21:21:00
-
I can not create a virtual port with setup manager v1.28.
Have set the serial settings in the Webswitch to:
Remote serial (RFC2217/Raw): Server
Remote serial mode: Normal
Remote serial timeout(secs): 3600
Remote serial TCP port: 11182
Remote serial host/IP: empty
Remote serial DSR: No
Remote serial CTS: No
In the serial port setting of the setup program is use:
Serial port: COM2 (in the drop down menu i have the choose between COM1, COM2, COM3
IP Address/Host Name: 192.168.178.52
TCP port: 11182
After create I get the message Serial port created/updated! Port status is then Not installed
mblog.txt shows:
4-12-2015 21:15:55 *********************************************************
4-12-2015 21:15:55 *** Program Start version 1.28.0.0
4-12-2015 21:15:55 *** Date: 4-12-2015
4-12-2015 21:15:55 *** Time: 21:15
4-12-2015 21:15:55 *********************************************************
4-12-2015 21:15:55 Date=vrijdag 4 december 2015
4-12-2015 21:15:55 Time=21:15:55
4-12-2015 21:15:55 .NET=4.0.0.0
4-12-2015 21:15:55 Versions
4-12-2015 21:15:55 Setup Manager=1.28.0.0
4-12-2015 21:15:55 COM Ports
Running Windows 10
Need your advice to solve this.
73, Fred/PA8F
-
Have you tried to change to another Serial port in the dropdown and then back to the one you created? It seems there is a bug in the Setup Manager which does not update the Port status textbox after the port has been created.
-
Thanks Jan for your reply. It is working great now!!
73, Fred/PA8F