Remote Rig
Webswitch 1216H Support in English => Configuration, Webswitch 1216H => Topic started by: sq6mic on 2015-12-04, 23:15:30
-
Hello
has anybody have idea how I should connetc RC1216 L with my rotator control box ?
In manual of my rotator I can't find info about pins 2 and 3 - no info about plus or minus .
Is anyone using G 450 xl in this configuration ?
-
Hi you must open the box and connect the relay outouts in parallell with the CW, CCW buttons. The A/D input has to be connected to a point where you can see that the voltage is changing relative to the direction of the antenna
73 de mike
-
Thank you for your help .
Working 100 % correct !!
Best wishes !