Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: KC7JLU on 2015-12-07, 16:48:14
-
So sometimes when i turn on the control head it just shows hello and almost gets hung up. If i unplug the RJ-11 and plug it back it it works fine any ideas? I have no problems with audio or connecting to the remote side. Thanks
-
I also have them set to mode 5 and the most recent Firmware
-
Any Ideas? anyone
-
There is no explanation from the Remoterig systems point of view. The only thing I can think of is that the internet connection is not stable at the beginning of the session resulting in packet lost.
/mike
-
But if I cycle power it then works? do we have any other ideas ? settings ? It does the same thing when they are hooked up to the same LAN.
-
The same thing happens to me occasionally, too. It's not a problem for me, since I know what to do when it happens. However, it may confuse new users.
73 Marvin VE3VEE
-
Do you have any idea why? I have tried everything and bypassed the router still no change i need to remove rJ-11 and plug it in to make the 480 head come alive.
-
have you checked to see that the 480 has the latest firmware? Just to cover all bases.
I have a 480 and am following all threads with "480" in the header... Trying to avoid common problems....
hope you get it resolved and report back so we can all learn.
Ray
-
Yes its up to date. Still having problems getting it to turn on once its on it works great!