Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: oe3cfc on 2016-04-18, 20:18:27
-
Maybe anybody can help me ! Alinco DX SR8E 1258 MKII RRC DSL Fix IP with NO IP DDNS
ControlSide Fixe IP and also DSL
When i connect the Radio i get 10- 15, 20 x a Sip Error an then suddenly i get contact with no error and it,s play wonderful many many Hours but i turn again the TX off again 20-30 40 x a Error to i can connect ???
Port correct SIp Alg Off No DHCP by RRC Radio DDNS Ok, DNS Ok I have no answer ?
Maybe it have a Om Answer
best 73 de OE3CFC
Chris Vienna
-
If you have fixed IP in in both ends then it must be a router problem, probably in the Radio end. Check that the routers have the latest firmware, If any of the router is of some odd version which you get for free from the ISP, try to change it first.
73 de mike
-
Ok, MIke
Thanks i will test und i hope
73 chris
-
Hello Mike !
I have test the Firmware and it,s the latest
I dont no what i can do ?
Maybe you have the possibility to test this from your Office ?
it,s woult be a help for me !
Tnx Chris
OE3CFC
-
Which firmware version is the RRC using?
-
Company Microbit RRC Radio The same in the Control
Product 1258
PID 4
Version 6
HW 7
Software 2.86
Bootloader 1.10
Compiler 4.6.2
Build May 28 2015 11:12:06
ROM/RAM 476084/42016
ETH-RAM 2944 (max 3kB)
USB-RAM 15348 (max 16kB)
Battery-RAM 4
ResetSrc 0 [3]
Last WD Reset 9
Uptime 0 Days, 0 Hours, 14 Mins, 37 Secs
Serial number 4936
MAC address 00:1e:fd:01:89:e8
IP address 10.0.0.227
Netmask 255.255.255.0
Gateway 10.0.0.138
DNS 10.0.0.138
Wi-Fi network module not present
i have test this moment the UDP cmd min-data-size 40 on control side ! it,s play in the moment !