Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: sq7pfx on 2016-12-07, 23:27:32

Title: Yaesu ft 891
Post by: sq7pfx on 2016-12-07, 23:27:32

Hello . how to configure Yaesu ft 891 and RRC 1258MKIISV7

Title: Re: Yaesu ft 891
Post by: sq7pfx on 2016-12-07, 23:32:27

settings and cables, the same as in ft857

Title: Re: Yaesu ft 891
Post by: sm2o on 2016-12-08, 08:31:23

Yes the hardware interface is the same but the protocol is different so it will not work, We may implement support for it during next year.

73 de mike

Title: Re: Yaesu ft 891
Post by: sq7pfx on 2016-12-08, 08:46:29

Thank you, Mike. I hope that 2017 will be supported ft891
73 de Tom

Title: Re: Yaesu ft 891
Post by: OK1CPR on 2017-11-08, 12:52:47

Hi, something new about FT-891 and remote controling (remote panel)?
Thanks

Title: Re: Yaesu ft 891
Post by: ce6aop on 2017-12-14, 21:10:14

Hi,

is FT891  already supported?

73´s

Eric

Title: Re: Yaesu ft 891
Post by: w7cen on 2019-11-24, 02:19:04

Anyone had luck configuring the FT-891 with remote rig?? If so what’s the jumper config??