Remote Rig
RRC-Micro PC Client in English => General discussion => Topic started by: K7FL on 2016-12-28, 19:10:34
-
I am successfully using a K3/0 Mini plus the K3, KAT & KPA 500's via the RRC boxes. I also have a PC connected via Team Viewer which talks to the configuration via serial ports. I'm connecting an IP power strip, and curious as to the best boot sequence to program so everything is 'awake' when hardware and software are trying to communicate. I'm thinking the following order, but would welcome suggestions:
1. Web router/hub
2. RRC at remote site
3. PC
4. 12VDC bus that powers radio and radio accessories
73,
Dennis, K7FL