Remote Rig
RRC-Micro PC Client in English => General discussion => Topic started by: ur4qrh on 2017-08-01, 10:46:45
-
Hello!
I use remoterig rrc1258 mkII (v2.91) and rrc-micro 1274B (v 1.10.1.0)
but i can not change audio quality, i change in rrc1258 but realy in status windows i always see "Current audio quality 0 - alaw 8 kHz"
also i see about 90-100 kbits traffic in the internet channel regardless of the audio mode selected.
Anybody can check this ?
-
That is I believe correct behavior. I am pretty sure that Mike said that the RRC Micro Client as well
as the Nano Client both automatically set the audio quality to CODEC 0 for the duration of the
session.
73,
Mitch DJ0QN / K7DX
-
But for digital mode is not the best choice?
-
Maybe not, but since you can use this setup without any additional interface by taking audio directly
off of the stream, it usually works very well.
73,
Mitch DJ0QN / K7DX
-
ok, Thank You Mitch for clarifications.