Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: N5NHJ (I8NHJ) on 2017-10-22, 19:05:24

Title: SOFTWARE PTT - ICOM IC-7100
Post by: N5NHJ (I8NHJ) on 2017-10-22, 19:05:24

I'm trying to set up WSJT-X with my IC-7100 and I wasn't able to key the transmitter via any COM RTS/DTR line.
After an exhaustive test session that included using different software too (N1MM, MTTY, DX4WIN) here they are my findings:

1) The radio can be set up in transmission using the CAT commands, but no audio is transmitted if the PTT is not pressed (it seems remoterig DO NOT pass audio without pressing the radio PTT)

2) The radio can be keyed using COMExt only if both DTR and RTS are HIGH;

3) Using COM1 or COM2 works for sending CW (DTR), doesn't work for PTT (RTS);

Any suggestion?

 

Title: Re: SOFTWARE PTT - ICOM IC-7100
Post by: N5NHJ (I8NHJ) on 2017-11-02, 15:19:48

No words from the support?
Thanks.
Max

Title: Re: SOFTWARE PTT - ICOM IC-7100
Post by: EA1IIO on 2018-05-15, 22:44:50

Hello,

I have a Kenwood TS-480. I spent 3 days until I get it working.

My screenshots are attached, if you need more info, please ask :)