Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: W7HLR on 2018-01-14, 04:38:58

Title: Vox with Icom IC-7100
Post by: W7HLR on 2018-01-14, 04:38:58
Vox does not work when the IC-7100 is in the remote control configuration, but is fine when directly connected to the base rig.  Is Vox supported via remote?  Is so, how do I configure?
Title: Re: Vox with Icom IC-7100
Post by: dj0qn on 2018-01-14, 05:14:10
To allow VOX to work with any rig under RemoteRig, you must change under advanced settings
the "RTP tx mode" to "continuous" on both RRC's.

73,
Mitch DJ0QN / K7DX
Title: Re: Vox with Icom IC-7100
Post by: W7HLR on 2018-01-16, 02:23:44
Thank you, Mitch!  Works fine now.