Remote Rig

RRC 1258 Support in English => Feature Requests => Topic started by: w5rhr on 2018-02-28, 15:36:28

Title: supply power for yaesu MH59 typle mics thru mic jack?
Post by: w5rhr on 2018-02-28, 15:36:28

Perhaps I am in minority, but would it be possible to provide the voltage needed to operate MH59 hand mic with future modifications?
Or I am wondering small adapter in line that provides the voltage on appropriate pins to power the mic?

Thank you

Title: Re: supply power for yaesu MH59 typle mics thru mic jack?
Post by: EA5WA on 2020-10-14, 07:01:27

You are not minority...but seems that this topic does not interest to Microbit....

I've read a lot of posts with this problem without any solution.

I've just posted a similar request for Kenwood microphones....

73 EA5WA Juan Carlos

Title: Re: supply power for yaesu MH59 typle mics thru mic jack?
Post by: ea5zj on 2020-10-14, 23:51:19

Some users have asked before us but with no answer in the forum. This is not good. I think it's an easy solution

Title: Re: supply power for yaesu MH59 typle mics thru mic jack?
Post by: sm2o on 2020-10-15, 18:01:24

Hi I have answered this many times before. MH-59 cannot be used, it is not a traditional DTMF mic, it has a Microcontroller inside which has separate data lines to the Radio. These datalines is not transferred by the Remoterig Use the statndard mic MH-31.

73 de mike

Title: Re: supply power for yaesu MH59 typle mics thru mic jack?
Post by: EA5WA on 2020-11-22, 19:59:47

Yes @sm2o Mike, but you are not answering to the "power supply for mic" problem....

It's repeatly asked on this forum, but no answer from Microbit.

http://www.remoterig.com/forum/index.php?topic=6950.msg32006#msg32006

http://www.remoterig.com/forum/index.php?topic=5738.msg27010#msg27010

73's de EA5WA Juan Carlos