Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: Howard on 2018-04-10, 02:53:17

Title: Lost SSB Audio
Post by: Howard on 2018-04-10, 02:53:17

I have been using Remote Rig to connect remotely for over 2 yrs. Then all of a sudden I can only transmit a tune-up tone. In SSB mode I only transmit "White noise" ...no audio. None of the settings have changed and interconnect cables test out to be ok. Anyone have experience with this? Thanks.

Title: Re: Lost SSB Audio
Post by: dj0qn on 2018-04-10, 04:21:22

Audio is in hardware only. Your problem must be in:

- the microphone cable
- or the cable that goes from the radio RRC AUX/MIC jack to the rig microphone
- or one of the red straps in one of the RRC's came loose
- or there is a setting in the rig that is messed-up

73,
Mitch DJ0QN / K7DX

Title: Re: Lost SSB Audio
Post by: Howard on 2018-04-10, 17:58:29

Thank you, Mitch. Very helpful.