Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: NZ5E on 2011-02-08, 03:08:27

Title: Better microphone for TS-480 remote use?
Post by: NZ5E on 2011-02-08, 03:08:27
Anyone using something different than the stock hand microphone with their TS-480 for remote use with the Remote Rig system?

I stayed inside and played radio today while it was snowing outside.  A couple of different stations played a clip of my audio back over the radio for me to hear.  I thought my audio sounded a little bit muffled with the stock hand microphone, which started me thinking about enhancing my audio quality with a replacement microphone.  Maybe one of the models from Heil Sound?
Title: Re: Better microphone for TS-480 remote use?
Post by: ea3in on 2011-02-08, 17:47:33
I didn't found any better one than the stock MC-43

Also tried a Heil HC-4, an MC-60A and a senheiser.
Title: Re: Better microphone for TS-480 remote use?
Post by: NZ5E on 2011-02-09, 14:11:17
I didn't found any better one than the stock MC-43

Also tried a Heil HC-4, an MC-60A and a senheiser.

I detected a hollow sound while listening to the recordings that is a common characteristic of a hand microphone.  Then when I went to the Heil Sound website, that characteristic is exactly what the description of the Handi Mic and GM Series claims to solve.

In a review on eham.net of the Heil Goldline Series, a nonremote user with a TS-480 mentioned using the "wide" setting for the microphone and the "high boost" setting for the TS-480.  I realize that the optimum audio settings would have to be tailored to an individuals voice, but would the settings that work well while operating nonremote be the same settings that work well while operating remotely over the internet through the Remote Rig system?
Title: Re: Better microphone for TS-480 remote use?
Post by: VE3VEE on 2014-07-09, 13:42:50
I realize I'm replying to a 3 year old thread, but I'm very curious if the original poster (or anyone else) in fact tried a different microphone and if there was an improvement. Also, while you were unhappy with your audio quality, what "Audio Quality" did you have set for your RRC-1258 units?

I noticed, a few days ago, my TX audio quality wasn't the best, but last night I realized this could be adjusted by the RRC-1258 "Audio Quality" settings. I switched from "0" to "2" and it seems to have improved. I will do more testing tonight, but I think I might have solved my problem.

Still though, I'd like to know other people's experiences with different microphones.

73 Marvin VE3VEE
Title: Re: Better microphone for TS-480 remote use?
Post by: 4Z4OQ on 2014-07-09, 14:58:32
Hi Marvim

The original hand mic arriving with the ts-480 is one of the best options... I used several others with a dirrect connection and come back to the hand mic...
I am now putting up a multiple input mixer (see earlier post) and will adv outcome ASAP.

73

Ziv
Title: Re: Better microphone for TS-480 remote use?
Post by: VE3VEE on 2014-07-09, 15:01:27
Ziv, thanks. I will read your future posts to see what you will find out.

73 Marvin VE3VEE
Title: Re: Better microphone for TS-480 remote use?
Post by: K6HP on 2014-08-13, 06:29:22
I believe the TS-480 only has the ability for a 2.4 wide bandwidth on TX. Therefore, it is not going to be easy to modify the audio quality to get a better sound out of the available bandwidth.

You can tailor it, to some degree, with the EQ settings in the radio based on your voice but that is about it. Using a higher bandwidth / quality mic will probably not provide much of a change in the audio quality, to a degree worth the cost.

73,
Ed
K6HP