Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: ea3gza on 2018-10-14, 18:03:58

Title: USB rotator interface
Post by: ea3gza on 2018-10-14, 18:03:58

Hello all. I'm Miguel, from Spain. Sorry for mypoor english.
After search for a rotator I can manage with Remoterig, i  bought an Spid rotator but comes with USB interface. I'm blind, and I can't made the changes to install RS232 interface (as this page describe in an article) and if I
do that, I loose the warranty.

There are any solution to control my rotator remotely with remoterig, using USB? Now I'm using the rotator only connected to a computer with a software. Any ideas? 73 de EA3GZA

Title: Re: USB rotator interface
Post by: sm2o on 2018-10-14, 18:59:54

There is no way Remoterig can control a USB rotator

73 de mike

Title: Re: USB rotator interface
Post by: VK2DAG on 2018-10-30, 06:16:36

Try a small computer like a Raspberry Pi at the remote site and install "VirtualHere"  https://www.virtualhere.com/  (https://www.virtualhere.com/)

Very easy to set up.  It will make available any remote USB device as if it is plugged in to your local PC.

Matt -VK2DAG-