Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: PA5VEN on 2018-11-11, 12:48:23
-
Hello, I got two RRC 1258 sets (4) and also two of my friends own the same (we work with iCom 7100) but we all came to the conclusion that the wifi module is a piece of cr*p!
With all possible setups with 5 different routers/accespoints ALWAYs dropouts, dropout and dropouts........ We now all use very little Nexx routers (external usb feeded hardware) and use this with a cat5 cable hardwired to the remoterig and that will do the job. None of us was ever able to get those wifi modules working properly. (PA9LEX PA5VEN and PD9C)
Other than that: Remoterig rules!
73, Sven
-
There are two advantages of using an external WiFi Bridge:
1) 5 GHz band
2) You can use a public hotspot like a hotel to log into a web page to access the internet, the built-in card does not allow that
Otherwise, the internal card does not take up any more space if you can live with its limitations.
73,
Mitch DJ0QN / K7DX
-
That's why I posted this complain. Get the RR, but leave that wifi module alone.... It's bad....
73, Sven
-
Same problem here !
I've tried with lots of different WiFi setups assuming it was lack of bandwidth ... It's OK on SSB/FM but CW gives drops and irregular characters .
Does anyone have any suggestions ? I've tried changing from Iambic A to Iambic B as suggested elswhere on this group - no difference.
Robin
G3TKF
-
Wifi module works only in 2,4Ghz, not on 5Ghz.