Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: Mitch on 2019-04-15, 10:02:08

Title: RTL-SDR V3
Post by: Mitch on 2019-04-15, 10:02:08

Hello there would anyone know if possible to work both RRC-1258MkIIs and Kenwood TS 480 to RTL-SDR V3 RTL2832U. The cable has been already installed inside radio to RTL-SDR before but now would like to work with remoterig.

If this is possible to do on COM 1 both boxes how would I have settings in Serial settings in both Radio and Control side and is there anymore changes needed in settings.

Many Thanks

Title: Re: RTL-SDR V3
Post by: sm2o on 2019-04-15, 15:29:34

RTL-SDR is a USB device, it can't be connected to the RRC, only RS-232 or other serial devices.

73 de mike

Title: Re: RTL-SDR V3
Post by: Mitch on 2019-04-15, 19:58:34

Hi Mike what i have built from inside the radio to PC to dongle and works.  Just need to know if it would work remote.

https://www.ebay.co.uk/itm/RTL-SDR-Blog-V3-RTL2832U-1PPM-TCXO-HF-BiasT-SMA-Software-Defined-Radio/272411458376?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

https://www.ebay.co.uk/itm/USB-2-0-A-Female-TO-RS232-DB9-Female-Serial-Cable-Adapter-Converter/272805994084?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

73s de Gary

Title: Re: RTL-SDR V3
Post by: sm2o on 2019-04-15, 22:18:04

As I wrote before, Remoterig cannot be used to transfer a USB connection.

/mike

Title: Re: RTL-SDR V3
Post by: Mitch on 2019-04-15, 22:26:46

Ok mike many thanks.

Title: Re: RTL-SDR V3
Post by: VK2DAG on 2019-04-20, 07:27:44

Get VirtualHere.  https://www.virtualhere.com/  It's what I use for a SDR RTL, SDR Softrock and rotator control.

Matt.