Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: Cn8vy on 2019-06-23, 19:22:01

Title: multiple radios in the same location
Post by: Cn8vy on 2019-06-23, 19:22:01

Hello all,
I would like to use simultaneously a TS480 and a  IC706 located at the same QTH. My intention is to use 2 pairs of RRC1258. In the radio site, I will connect a RRC besides each radio. My question is: can I use the same wifi box for the 2 RRC or do I need to consider separate internet connections?

Of cours, each radio will be connected to a dedicated antenna system.

Thanks in advance for your help;

Title: Re: multiple radios in the same location
Post by: dj0qn on 2019-06-24, 03:38:49

You can setup effectively an unlimited amount of radios with their own RRC's at a host site. The only limiting
factor would be the bandwidth (modern internet connections would not be an issue) and RF interference.

To make them work, all you need to do is to assign different unique sets of port numbers to each RRC and forward
these ports in the router to the correct internal IP number.

73,
Mitch DJ0QN / K7DX

Title: Re: multiple radios in the same location
Post by: Cn8vy on 2019-06-25, 03:15:55

Thank you Mitch, I got you.

Driss