Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: wb9ayd on 2020-01-15, 17:38:36
-
Has anyone had success in implementing the built in TNC in the Kenwood TM-D710 via Remoterig? I see in another post there was an issue with no PTT. I am using Winlink Express with a com cable plugged into the 710 head. It initializes fine but no transmit. I know that no DTMF tones can be sent via the standard mic but I thought this would be a different approach to communicate from the head TNC over the internet to the radio body. Appreciate any ideas or potential solutions.
73
Gary
WB9AYD