Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: ea3in on 2011-03-18, 09:08:34

Title: RRC Client
Post by: ea3in on 2011-03-18, 09:08:34

I have migrated to version 1.1.4

My PC is Windows 7

After the new setup, I open a connection to teh Radio RRC and it says SIP connected, but if I look at the RRC status it says idle (it should be connecting/transferring). Obviously I can't establish a HRD connection beacuse there is no a real connection.

I think the setup is ok

I have another laptop with an older RRC client and oit works ok, so no problem with the Radio RRC setup.

Any idea?

Title: Re: RRC Client
Post by: roland on 2011-03-18, 09:34:23

Hi

Are you running Win7 32bit or 64bit?
Can you enable Debug + SIP + RTP and restart. Then run connect/disconnect.
This will generate a file mblog.txt in your Documents folder. Send that one to me.

Title: Re: RRC Client
Post by: ea3in on 2011-03-18, 18:05:03

32 bits

I mail is snt tou you with the debug file

Title: Re: RRC Client
Post by: roland on 2011-03-21, 10:26:37

Change value of multiplier to 1 in the Profile.
Does that has any effect?

Title: Re: RRC Client
Post by: ea3in on 2011-03-22, 10:46:22

No

Thanks