Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: KB8CR on 2020-04-19, 20:40:30
-
I have my RRC-Control box set up for Icom CI-V. I am using an Icom hand mic on it.
If I set up a RRC-Radio box for a Yaesu (General) rig, and cable it to that radio, can I use the RRC-Control box as it is currently configured (except for changing the mode parameter to Yaesu), or do I need to change the jumpers in the RRC-Control box and use a Yaesu mic?
Thanks
Charlie KB8CR
-
Yes you can use the ICOM Mic in the control end, without restrapping. Maybe the mic gain has to be adjusted, but it should work
73 de mike
-
Thank you . I thought[ so but wasn't sure.