Remote Rig

RRC-Micro PC Client in English => General discussion => Topic started by: Michael on 2011-04-04, 03:20:51

Title: Reset Remote
Post by: Michael on 2011-04-04, 03:20:51
Hi All:

Well, had to take down my remote station to reset and in order to do that had to cart the works back to my apartment.
Figured it would be a gd time to up date as well.
Now that I got the 2 devices on my LAN, FT-450 connected to the Radio RRC, can't seem to get the 2 units to talk to each other.
Perhaps I require the serial settings and IP settings. Should have written everything down but didn't and I'm having to start all over. UG.
TNX & 73:

Michael De VO1RYN
Title: Re: Reset Remote
Post by: dj0qn on 2011-04-04, 12:34:00

Now that both RRC boxes are on your local LAN, you should address them
with your internal IP addresses, e.g. or whatever they were
given by your router's DHCP server. Everything else should stay the same,
including the port changes. Just change it back when you move it to the
station again.

Mitch DJ0QN / K7DX