Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: oh3uu on 2011-04-13, 18:03:16
-
Hello
Has anybody succeeded to use USB 3G router on the Radio RCC site.
Risto
-
Hi Risto
Works fine for me
Tele2 usb-stick and UMR router about 100 ms delay
Good luck
peder
-
Hello
Has anybody succeeded to use USB 3G router on the Radio RCC site.
Risto
Yes, Risto.
I use a UMR router and a USB dongle. Network is Telia. I have also run Hi3G.
The ping time is around 300 ms, so I have large values on the RRC "RX jitter buffer size" and "RX jitter delay" parameters.
The UMR and its power supply (a wall wart) emits much noise, so I had to install the UMR into a shielded box and use another, silent power supply.
/Uno, SM5ACU