Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: w7jag on 2011-05-20, 03:05:15

Title: Kenwood Ts-2000
Post by: w7jag on 2011-05-20, 03:05:15

I can turn the radio on with the rc-2000 however cannot transmit or receive audio.    I went to the site and verified that the speaker output is working and that the microphone that I am using with the patch cable is good which it is.    Earlier today the ts2000 was working fine with the remoterig, i could talk listen remotely.    I went to the radio site hooked up the serial cable to see if I could use the arcp software  it didnt work so I re configured the remoterig rcc1258mkII to original ts-2000 settings rebooted both still no transmit and receive audio  any ideas
are the remoterig boxes bad need repair.   they have been working fine with the ts-480 and worked fine for a time with the ts-2000 i can turen the radio on change frequencies access the menu, I just cannot transmit or receive audio

Title: Re: Kenwood Ts-2000
Post by: w7jag on 2011-05-21, 02:17:16

PROBLEM SOLVED
STUCK MIC IN PTT