Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: IZ7ANL on 2011-08-24, 00:49:21

Title: ProSiStel no link
Post by: IZ7ANL on 2011-08-24, 00:49:21

Any link is avalable on page ProSistel Rotor. Any body can help me to configure and a picture to connect RS232.
My best regard
Nick 73

Title: Re: ProSiStel no link
Post by: ON4AOI on 2011-08-24, 18:18:58

check one of my previous post with schematics

Guy ON4AOI

Title: Re: ProSiStel no link
Post by: IZ7ANL on 2011-08-25, 00:32:37

I didn't find anythings in old post. May you help me?
73 Nicola

Title: Re: ProSiStel no link
Post by: ON4AOI on 2011-08-25, 06:22:06

Hi Nick if you do a search for prositel and on4aoi you find it easy

here is the link

http://www.remoterig.com/forum/index.php?action=dlattach;topic=391.0;attach=107;image

Guy ON4AOI

Title: Re: ProSiStel no link
Post by: IZ7ANL on 2011-08-25, 23:17:39

Many thanks Guy. May you tell me about the setting, serial mode 3 or 5?
73 Nicola

Title: Re: ProSiStel no link
Post by: ON4AOI on 2011-08-26, 07:55:58

Hi Nicola

Mode should be 3
baud rate = 9600
data bits=8
stop bits=1
parity=0
Rts/cts = Yes

in both boxes

Guy ON4AOI

Title: Re: ProSiStel no link
Post by: IZ7ANL on 2011-08-27, 00:40:35

Guy,
unfortunaly no play. I used Com1 inverted cable 2-3 but I didn't have succes. Tomorrow I will try Com2 straight cable.
With Daiwa rotor 4 motor Com1 all was ok.
73 Nicola