Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - IK2DED Giulio

Pages: [1]
1
Mike,
this morning i have tested with another TS480 HX of my friend, the same happen, only HALLO on display, changed also the two cable TTL.
So i have saved 6 files html of the total configuration and status.
For each remoterig at station and at radio, i have saved with power radio button off, then on, then ON after 120 seconds.
Each are different.
So, i cant send here, but if you want to send me your mail, i can send you.
My mail is:
ik2ded@yahoo.it
Many thanks.
Giulio

2
General discussion forum / TS480 dont work MK1258 broken?
« on: 2014-09-16, 09:55:08 »
I 've got two set of remote rig.
One for Yaesu twin and one for TS480.
The set for the TS480 was dismantled some time ago, they was working perfectly, now back on again here in home to test it, does not work anymore.
Tested in LAN with network switches, when I turn on the front display reads only HALLO, then hangs around, it is no longer possible to turn off the radio, no button work.
By connecting directly with its short cable the faceplate to the radio without remoterig , it turn on the display, the radio is on, and work all.
With remoterig is not communicating, I also uploaded the latest version of SW, but nothing to do.
May be  are failed the remote rig, I can send for repair?
I try tomorrow with another TS480, but cant do more.
Thanks.
Giulio IK2DED

3
Hi Mike, and many thanks for reply.
Its all ok now, i'll buy a Yaesu twin and then if i change radio i can use them for all the other equipment.
Another question, the remoted station now are used by many OM, we are 4 om.
So the future configuration may be one Yaesu 950 in remote site, one in my shack, with the 1258 Yaseu twin, but what the other OM need to buy to use the station from a PC and HRD?
Many thanks again.
Giulio.

4
Configuration, RRC 1258 / RRC-1258 MkIIs and Yaesu, K3, Icom
« on: 2012-01-31, 15:37:19 »
I want to buy a set of RRC-1258MkIIs, but this pair work for all the radio?
So, why there are a pair only for Yaesu twin, and a pair for K3 twin?
If i use a pair of 1258MKIIs not twin, i may use all the radio that i have in my station and also a twin Yaesu FT950/2000 or K3, changing the SW, or only all the other?
So changing the radio i need also to change the 1258?
I have had for many years remote station, analogical 20 years ago with a twin of Icom, with many SHF link, and now with HRD and IPSOUND, and also a custom CW interface for use the cw with pc.
But i'm boring to switch pc on, ipsound and start HRD, and becouse in the past i was using two Icom, the feel to use a twin set of radio is a different way to use a remote, i dont like to much use HRD or any other PC SW.
Many thanks and sorry for my simple question.
73 Giulio

Pages: [1]