Messages

1

Hardware, Cabling, Installations / hardware problems for RRC1258?

« on: 2014-12-21, 17:16:46 »

Hello,
suddenly my unit RRC1258, (sn 4377 server) with ip 194.116.59.36, no longer able to communicate with my radio icom 2820.
The other unit (receiver) has ip 194.116.59.37; on the web page "status" there are no errors related to TCP / IP, sip pass ... and more.
I think it's due to a TTL port hardware fault.
When I connect it all together in the speaker of the radio I hear a cyclical noise (TOC TOC) and the display will remain off.
Does anyone have any idea what can I check? Voltages, IC ... something?
I also have an oscilloscope.

Thank you for your help.


Andrea

 

2

Hardware, Cabling, Installations / RRC1258 V6/7

« on: 2012-11-14, 23:44:05 »

Good evening everyone, I posted a message last night, but got lost. I try to rewrite it.
I have a Radio control with hardware version 6.
Can I use it with radio remote control version 7?
While inserting the correct parameters will always appear sip error and, in version 7, I saw that there is a SIP voice out / in on port 5060. How can this be? I do not have the firewall.
Thanks for the replies.

Andrea IW1GAP

3

General discussion forum / RRC-1258 Firmware 2.65 V7

« on: 2012-11-13, 23:33:56 »

Hello,
I find it really strange that:
my device RRC Radio MkII can not communicate with RRC-Control V7.
There is a minimum compatibility between the two terminals?
The error that appears is:
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error

the doors, on firewall, are open, the cable for ic2820 is ok (i13a).
Any ideas please?

thanks
Andrea

4

General discussion / RRC-Micro PC and ICOM IC-E2820

« on: 2012-04-07, 00:12:32 »

Hello,
there is the possibility to configure the icom IC-E2820 to work with RRC-Micro?
Happy Easter to everyone.
 
Andrea IW1GAP

5

General discussion / Re: RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-04-07, 00:06:24 »

Hello,
I tested the essential features of the version.
If I, with HRD, I press the PTT does not tx the voice, the voice there is only if I use the 1274A. If I try to use my sound card crashes the program.
I hope this is the first release ... there is still much more work to do.
Happy Easter to everyone.
Hopefully better news soon.

Andrea

6

General discussion / Re: RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-29, 13:56:05 »

It is true, there is no download

 

7

General discussion / Re: RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-28, 00:04:18 »

I test It.
Good night ok?
I wite we the results
Bye

8

General discussion / Re: RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-22, 01:00:51 »

Hi,
Patience is a good thing.
I have not written immediately, but have already spent 15 days, without your products, I performed the first experiments of remote radio with HRD. This feature is a native HRD service and I have not encountered any particular problems.
I can not understand how you can try to sell, in the specific case, Remoterig 1274A product, if is not compatible with all possible configurations.
I also purchased the RRC-1258. Cut PCB for remote the fronts? Not to use the original ICOM microphones because I must buy another kit (icom)?
I'am still waiting!
Sooner or later something will come!

9

General discussion / Re: RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-06, 16:02:48 »

We will have a look at that and either come with fix for it or ensure that it works with the 1.5 update which will be released for test very soon.

Hello,
Any news?
When they release the new software?

Many thanks

Andrea

10

General discussion / Re: RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-04, 09:41:09 »

Hi,
I have tried box to box and work...
with del 1274A I could not get it to work with any settings.
I will have sent you my data...
occurs in your email ...
See you soon!

Andrea

My pc data
win xp
sp3

bye

P.S.
I am not HF wired....

Bye

11

General discussion / Re: RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-03, 17:03:01 »

Great!
I'm really impatient to test this new configuration.
After two weeks of tests that have never been successful not know what to think.
If you believe, when you have something ready, do not hesitate to contact me, this trial is part of a project that now will be stopped.
Thank you!

Andrea

12

Hardware, Cabling, Installations / Re: Yaesu FT857 not vork

« on: 2012-03-02, 23:40:42 »

Hi,
I post the RRC-Microclient question on dedicated forum :-)

TNX

GAP

13

General discussion / RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-02, 23:29:28 »

Hello everyone,
My name is Andrea and I purchased Vs. product 1274A.
I using the software Microbit RRC-Client vers. 1.1.2 but unfortunately I can not interface my Yaesu FT857 with HRD version 5.11
I use the scheme published by FT8x7 pg. To 141 pg. Rev. 147, A22 manual, TTL/mini din ... COM0 ...
I can't interface it to the program because voice and microphone work perfectly, I receive and transmit, but unfortunately does not recognize the COM.
I am available to attach the logs ... I have no more ideas and then ask for help.
Can we help me?

Thank you!

Andrea

IW1GAP

14

Hardware, Cabling, Installations / Re: Yaesu FT857 not vork

« on: 2012-02-29, 23:20:38 »

Hi,
i have sent my data...
tnx
bye

15

Hardware, Cabling, Installations / Re: Yaesu FT857 not vork

« on: 2012-02-29, 00:12:45 »

 
All right, It work!!!!!!!
SIP Autoconnect... Yes and no NO,
It work with RRc to RRc&HRD.

With REMOTERIG 1274A I am not able to make it work.
COM0 on RRC
COM0 on 1274A, Mode 4, COM50 (same com on HRD)... nothing
I also tried to simulate a 2 com ... then with 2, 4 mode, com50... nothing
use usb com port menu ... I do not see on radio menu...
Any help please?
Many, many, many thanks

GAP