Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SM0NEK

Pages: [1]
1
Hi Bob

I had the same problem because that I did not read the manual correct. Maybe it's the same with you ;-)
The red strap at the radio unit from RxD to "pin 8", is it set? The text says that it's only valid for the first version of the IC-7100. I did not read it carefully enough so I left it out on the radio unit. I have a late version so I have the extra PCB as well.

Just my two pennies.

/Lars-Owe

2
Konfiguration av RRC 1258 / Re: IC-7100 startar inte
« on: 2015-10-01, 17:20:54 »
Hej

Jag har löst problemet, som vanligt SBS!

/Owe

3
Konfiguration av RRC 1258 / IC-7100 startar inte
« on: 2015-10-01, 15:59:16 »
Hej

Jag har tidigare kört en IC-706 mot min Remoterig utan problem men försöker nu att få igång en IC-7100.

Det som händer är att gula indikeringen (både på Control- och Radioenheten) tänds upp men slocknar efter 6 sek. På radion tänds displayen upp, visar väkomsttexten samt att power ut står på 100%, sen slocknar det.

Det är ett sent s/n, jag har interfacet 1258M i controldelen, strappat radiodelen efter manualen (Rev A33 - 2015 jan 28). Trippelkollat strapparna i radiodelen.
Jag har provat men andra kablar på båda sidorna.

Givetvis fungerar det ok med en kabel direkt mellan radio och kontrollpanel.

Vad har jag glömt eller missat?

73/Owe

4
General / Re: Nano and Icom 706
« on: 2015-03-31, 17:01:36 »
Yes that's right, and you said so too. But it always fun to test.
Well, case closed!

73/Lars-Owe
 

5
General / Re: Nano with China brand smartphone
« on: 2015-03-30, 18:14:19 »
Hello

Yes, I have read that. And Google Play says (similar to) "none of your phones is compatible with the app".

But let me put the question this way, at the time of downloading, does the app check my phone for compatibility by doing a test directly with the phone? Or is there a list with compatible phones which my phone is checked with?


Cheers
Lars-Owe

6
General / Nano and Icom 706
« on: 2015-03-30, 14:04:29 »
Hello

When I spoked to Mike at the Eskilstuna hamfest, I got the feeling that Nano and Icom 706 don’t work so well together.
I have tested with a small (cheap) Samsung smartphone with the following result:

- turn power on, ok
- turn power off, after a couple times
- change fx, ok
- transmitting, ok
- modulation ssb, ok
- receive, no audio!

Is this "normal" with Icom 706 or is it something else I can do/test?

Cheers

SM0NEK, Lars-Owe

7
General / Nano with China brand smartphone
« on: 2015-03-30, 14:01:44 »
Hello

The Nano Server App.
I read somewhere in the forum that there is a list at Google Play which tells which smartphones that can handle SIP apps. If so there may be smartphones not in the list but they can handle SIP.
I have a China brand smartphone in which I run another SIP app but I cannot download the server app from Google Play.

So, can I get hold of the app for download and install outside Google Play for test?


Cheers

SM0NEK, Lars-Owe

8
General / Re: nano rrc ic-7100
« on: 2015-03-13, 15:28:13 »
Hi Neil

You have to get an i/f with its own power. But if you want to open your existing cable and you can easily feed the i/f with external power.

Your cable looks something like the schematics on this page: http://www.qsl.net/g3vgr/civ.html

There you can see which pin(s) you have to feed with 12V DC.

Otherwise, Icom has it's own i/f CT17 and there are other out there as well.

Good Luck!


73 SM0NEK, Lars-Owe

9
Hej

Jag sitter på Öppen fiber med Bahnhof som operatör. I höstas så fick jag problem med bl.a. min ip-växel. Vi en snabb felsökning visade det sig att den publika ip-adressen inte var densamma som min router såg, dvs dubbel NAT. Det hade ändrats utan föregående information.

Vid kontakt med Bahnhof fick jag beskedet att för de kunder som upplever problem med omställningen ger dom tillbaka en enkel NAT. Så det var löst på 5 min.
Dom uppskattar att det inte påverkar mer än ca 5% av kunderna.


/Owe

Pages: [1]