Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dl5cg

Pages: [1]
1
Hardware, Cabling, Installations / 2 x IC 7300 Remoterig ?
« on: 2019-08-24, 20:27:01 »
Hello, does anyone use 2 x IC 7300 for Remoterig? So once an IC 7300 on the antenna and a second in the Shack? Does the variant work without problems? What is the required data stream?
Thank you, 73 Andreas

2
General discussion / Re: rrc micro ts590s
« on: 2018-06-16, 00:03:41 »
Hello Mitch, i use ONE TS590 SG !

HRD and TRX Manager works fine with the rrc micro dongle, but not the TS590 App :(

Many thanks and 73, Andreas DL5CG

3
General discussion / rrc micro ts590s
« on: 2018-05-28, 13:10:06 »

Hello, I need your help. i use a rrc micro and ssb and cw with the ts480 without problems.
but now I wanted to try it with the ts590s.

It does not work.

Does somebody has any idea ?
thank you very much and

73 andreas

www.dl5cg.de
Modify message

4
General discussion forum / Re: RRC Micro and TS 590s
« on: 2018-05-28, 13:08:46 »
sorry from post.

5
General discussion forum / RRC Micro and TS 590s
« on: 2018-05-28, 12:03:16 »
Hello, I need your help. i use a rrc micro and ssb and cw with the ts480 without problems.
but now I wanted to try it with the ts590s.

It does not work.

Does somebody has any idea ?
thank you very much and

73 andreas

www.dl5cg.de

6
Hello Remoterig Users,

i have a problem to set the CAT control an PTT in the configuration TS480 - FLDIGI via RRC-1258MkIIs.

Has anybody a script or a solution for my problem ?

Many thanks for the ham spirit and Happy Easter!

Vy 73 de Andreas www.dl5cg.de

7
Configuration, RRC 1258 / Problem TS 480 keying ?
« on: 2016-03-22, 17:25:59 »
Hello User,

at the moment I have trouble with the CW keying on my TS480SAT.
Has anybody a config example file for keying ? Is it useful to chance any
parameter in the TS480 menu too ? But i think the keying process is only to
set in the control box ? The keying sound is now very hard and smeared. It was
clear earlier.

Many thanks for a good idea :'(

Here can you see my actual keyer settings : http://www.dl5cg.de/aktuell/

73 Andreas DL5CG

8
Hi Mitch,

thanks for your fast support. Tomorrow I will set on the "antennaside" a serial  cabel between the 480 radio and the remoterig unit.

I was a little bit confused in the last time about different "solutions". Now I think, it is it...

Thanks for your HAM SPIRIT! I informing your here, when it works :)

73 Andreas DL5CG! TNX!!!

9
General discussion forum / TS480 CAT PTT digimodes problems
« on: 2015-11-03, 21:32:11 »
Hello,

here Andreas DL5CG. I use for a while the remoterig system.

SSB and CW works fine. Now i will use digimodes for the future.

I have set COM 2 on both side - serial ports - kenwood and 4800 baud 8 N 1.

I have fundamental questions. Is a serial cable from the  "radio side" ts 480 to the

RRC-1258MkIIs required ? On the  "control - home " side is use the usb port.

I canīt find CAT Control an PTT or digimodes. RX Digimode ist okay - works.

Has anybody a exempel for HRD, Logger32, MixMW, e.t.c.

Many thanks for your help!

73, Andreas DL5CG

Pages: [1]