Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - KD0PO

Pages: [1] 2
1
General discussion / Re: PC micro com port 1
« on: 2018-01-11, 04:49:29 »
anyone have any ideas???

2
Configuration, RRC 1258 / Re: TS-480 VOX
« on: 2017-11-10, 23:18:21 »
problem totally solved!


Thanks Palle for excellent support

73, Ray

3
Configuration, RRC 1258 / TS-480 VOX
« on: 2017-11-10, 13:18:47 »
Hello,

My setup
Win 10
TS 480
RRC with latest firmware

With a mic and PTT everything works.
With a mic and VOX, it doesn't.

If I hook the radio control head directly to the radio without remote rig, VOX works as it should.
WiTh the rig remoted, no go.

I've checked all jumpers. I've tried two different radios as well as two different control and radio boxes.

What am I missing???

Thanks, Ray

4
General discussion / PC micro com port 1
« on: 2017-11-06, 23:17:13 »
I have a green hereon rotor controller attached to the radio RRC.
When using the control RRC I had it as the port 1 set to mode 3, character time out.
How can I set the virtual comport 1 in the PC micro to control com pot 1 on the radio RRC for my rotor???

thank you for an excellent product

Ray

5
with the 1258 control unit my rotor used the com port setting "3" to control a green heron, what setting do I use with the PC client to do the same???

thank you

Ray

6
Configuration, Webswitch 1216H / Re: 1216 + Steppir SDA 100
« on: 2016-09-03, 21:05:46 »
if the SDA is not on "autotrack" just use the web interface to move up or down a few clicks on "fine" and it switches back to autotrack and all should be well....

73, KD0PO Ray

7
Feature Requests / RC1216H serial port
« on: 2015-12-21, 17:28:18 »
I request a serial port option for the Rotor control of the RC1216H similar to that available for the Expert 1K. That way I could use the web based control window but still have the option of using my logging interface to turn the rotor along with rig control with one click on the spotting window.

That would free up com1 to be a CAT to the amp.

thanks for your consideration AND for making a wonderful product line.

seasons greetings

Ray

8
General discussion forum / Re: TS480 RRC1258 CW problem
« on: 2015-12-11, 16:13:24 »
when I use the winkey with the little demo program from the winkey web site, mine works great. But when I use thw winkey app in my logging program (logic 9) it will send the first "title" of the macro out as code and then only the first 3 characters of the macro it's self.

I just opt for using the demo program as it seems to do what I need...

http://k1el.tripod.com/WKdemo.html

see if this resolves your problem. then you'll know if it is a rrc issue, a radio issue or a software issue...

Ray

9
General discussion forum / Re: TS-480 Control head
« on: 2015-12-11, 16:06:56 »
have you checked to see that the 480 has the latest firmware? Just to cover all bases.

I have a 480 and am following all threads with "480" in the header... Trying to avoid common problems....

hope you get it resolved and report back so we can all learn.

Ray

10
General discussion forum / Re: Feature Request
« on: 2015-12-09, 15:58:57 »
I use dyn for domain at my remote site. I navigate to the domain name wither I am at the remote site on it's local network or elsewhere in the world. Only one profile needed...

maybe I am making apples into oranges???

11
Hardware, Cabling, Installations / Re: rotor to com1???
« on: 2015-12-09, 01:51:16 »
a crossover cable and mode 3 works like a charm.

once again, thank you for excellent customer service.

73
Ray

12
Hardware, Cabling, Installations / Re: rotor to com1???
« on: 2015-12-08, 21:07:45 »
thank you. I was just unplugging the cable from a PC and plugging it in radio side com1. I will try a crossed cable tonight.

thanks for the input.

Ray

13
Hardware, Cabling, Installations / Re: rotor to com1???
« on: 2015-12-08, 20:03:34 »
Jan, Mike, any thoughts on this? Is it possible to control a rotor from the com1 of rrc-1258?

I have tried a straight through cable with every setting under the "serial" tab with and without flow control with no luck....

Thank you

Ray

14
Hardware, Cabling, Installations / rotor to com1???
« on: 2015-12-04, 23:18:06 »
My setup: TS-480 with control head plugged into RRC-control, RRC-remote is attached to body of radio. I have a PC attached via USB for winkey and also via com 2 mode 4 for PC control of radio cat (via Logic9 running on windows 10). I want to attach com1 to my green herron and run that from either logic or the green herron ap.

How do I set com 1 in control and radio RRC and what cable???

Logic control of cat is running perfectly

logic built in winkey app is not so good. It sends first three letters in string then starts over and leaves last three letters of string off so I am using the demo from winkey till I find a better way.

Thanks for your help with com1

Ray

15
It's not been possible before, but as Expert now a few weeks ago, have released a new firmware with protocol support, we will implement support for expert 1.3 and 2K as soon as we get a PA to test with

73 de mike

I also very much wish for control of my 2K-FA via RC-1216H.

I'd be happy to send you my amp to test with but I seem to use it several times a day!

Thank you for your top rate customer support.

Ray

Pages: [1] 2