Messages

1

General discussion forum / Re: IC-7100 Locks Up

« on: 2016-06-16, 15:49:52 »

I have same issue with an ic 706 I just hooked up. If you cycle the radio head power off and back on, the audio will return just like you had first turned the radio on. Every once in a while it takes 2 cycles of power. This is much faster recovery than waiting for rig to come back on it's own. So far mine only happens during transmit. It can happen anytime during the transmission, not just at the start. If I understand the lites on the remoterig, the audio stream is lost but since the yellow lite is still on, the SIP connection is still valid.

Jim
WH7CD

2

General discussion forum / AUDIO OUT FROM IC 706

« on: 2016-06-11, 19:52:40 »

Have a brand new system, all is working with the cable cut and just using the radio. The radio connects to RCC boxes and plays as advertised except I get no audio out of the ic-706 head. I jumper SP from the ic-706 to the SP on the RRC radio box and then on the controller box with the head I connect the speaker to the SP on the controller box and audio is there and good. With the newer controller without a jumper 4 should I expect to get audio out of the "phones" jack on the 706 head? It is not a big deal but I just want to know if something is wrong or that is the way it ?

Also, sometimes when turning power on the head I get 6 beeps then 12 beeps and the SIP does not connect. Is this an error code or what?
Jim
WH7CD