Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PD1DL

Pages: [1]
1
General / Re: App Period expired
« on: 2019-01-06, 20:41:49 »
Hi 4Z4OQ

Think you have to ask your question to:

email: mikael(a)microbit.se

73

2
Running a Kenwood TM-D700E front with the serial number 4050050 and G2.0 firmware. Working for the Kenwood TS-2000 and TM-D700E in combination with the RRC-1258MKII's.
When i put the front unit from the TM-D700 4 pin RJ12 4P4P TTL cable in the back of the TS-2000 the TS-2000 jumps on after pushing the ON button.

This Kenwood TM-D700E front unit got the same capability as the Kenwood RC-2000.

I got this radio with the G 2.0 firmware already inside.

Just to let you know.

73 PD1DL

3
General / Kenwood TM-D700 Nano app compatible ?
« on: 2018-12-27, 19:10:56 »
Does anyone know if it`s possible to connect the Kenwood Nano app directly to the RRC-1258MKII Kenwood TM-D700 ?

Here some info:

My Kenwood NANO app version 1.6.2 works fine to my Kenwood TS-2000. Phone is a Samsung Galaxy Note 8 with Android 8.0.0.
Works very good on WIFI , 3G, 4G internet to the TS-2000.

Settings in the radio RRC-1258MKII:

- Software 2.91
- COM 2 on 9600 Baud
- Mode 4 (Kenwood, Yaesu, Elecraft)


The following settings i tried for the Kenwood TM-D700:

- I am able to connect with the front of the Kenwood TM-D700 on the RRC-1258MKII controller flawless to the TM-D700 on different Baudrates
- Kenwood TM-D700 has the serial number 40500050 and G2.0 firmware.
- TM-D700 front connect without any trouble to my TS-2000. Direct in the TTL of the TS-2000 on the back and also with the RRC-1258MKII radio unit.

Now the trouble:

When i trying to connect the Kenwood NANO app from my phone with the TM-D700 i do get the connection to the RRC-1258MKII radio buth my TM-D700 front does not jump ON.
Running COM 2 on different baudrates and programmed the TM-D700 also on the right Baudrate as the RRC-1258MKII.

Tried different mode programs in the RRC-1258MKII and sure i using the right COM cable from the TM-D700 serial to the RRC1258.
Does anyone got the Kenwood NANO app working to the Kenwood TM-D700 ?

Please give my a reply :-)

73 PD1DL


4
General / Re: RRC nano kenwood & android 7.0 is not working?
« on: 2018-02-17, 22:33:49 »
Sinds some weeks i running here a Samsung Galaxy Note 7 with Android version 7.1.1    (17-2-2018)

Downloaded in the Android Goolge Play Store the Kenwood Nano app and where facing some audio problems in the beginning. TX audio where fine to the outside world. RX audio where there and seem to having some digital package failures. Finaly i found out that my settings in the RRC-1258MkII box with software version 2.91 has to be changed at the radio settings tab. From Program mode number 8 TS-2000/TM-D700 into number 4 Yaesu, Kenwood, Elecraft.
Into Program mode 4 - Yaesu, Kenwood, Elecraft is my audiostream without notifying problems in combination with the Kenwood TS-2000 and Kenwood Nano app version 1.5.1 on Wifi, 3G-4G, telecom provider.

(I don`t know if this make any difference. I don`t installed any kind of antivirus programs on my phone)


73 Dimi

5
General / Re: nano and galaxy s7 not working
« on: 2018-02-17, 22:02:44 »
Hi Partytyme

Sinds some weeks i running here a Samsung Galaxy Note 7 with Android version 7.1.1

Downloaded in the Android Goolge Play Store the Kenwood Nano app and where facing some audio problems in the beginning. TX audio where fine to the outside world. RX audio where there and seem to having some digital package failures. Finaly i found out that my settings in the RRC-1258MkII box with software version 2.91 has to be changed at the radio settings tab. From Program mode number 8 TS-2000/TM-D700 into number 4 Yaesu, Kenwood, Elecraft.
Into Program mode 4 - Yaesu, Kenwood, Elecraft is my audiostream without notifying problems in combination with the Kenwood TS-2000 and Kenwood Nano app version 1.5.1 on Wifi, 3G-4G, telecom provider.


73 Dimi

6
Oke we are now approx 20 days father in time after i report my issue/problem. Untill i wrote the issue on 3-5-2014 i noticed no errors anymore with the webswitch 1216H.

And this is what i find out. My Internet Service Provider (ISP) upgrade the internet speed for all there clients. That been a big operation and in the weeks i notice problems with the relay(s) start to do there own moves. My ISP made several disconnections in the internet connection for small moments for some weeks.

So my ISP where responseble for the errors.

Thanks Jan for the fast reply.

73 Dimitri PD1DL

7
Hi there and maybe you can help me with this problem.


I am running a webswitch 1216H and sinds a while sometimes my relays switch automatically OFF/ON. Sometimes i do not have this problem for a week and then it`s back again. I have changed my login name and password several times to see if that makes a different.

Here a copy of the system info of my webswitch 1216H:

Company      : Microbit
Product         : 1216H WebSwitch
Model           : Standard 1216L-4 or older
Software       : 3.5
Hardware      : 1
Bootloader    : 1.9
Build            : Oct 31 2013 17:44:13
S/N              : 1668
PID              : 4
Uptime         : 0 Days, 0 Hours, 7 Mins, 39 Secs
===================================
MAC             : (i changed blank)
IP address    : 192.168.2.5
Netmask       : 255.255.255.0
Gateway       : 192.168.2.1
DNS             : 192.168.2.1
===================================
Max available memory = 17701 bytes
Sun state                       : Unknown
Last Dynamic DNS status: Inactive
Rotator status                : Initialized
Ping status (watchdog)   : OK [2 ms]
Active profile: Profile 4


This out of control switching is very unpleasant. I have my PC hanging on my webswitch and sometimes it dropped out because the relay is going OFF/ON without touching it !

Anyone knows this problem ?


73 Dimitr PD1DL

8
General discussion / Re: Exactly what is wrong!
« on: 2011-11-23, 15:13:26 »
Thats great news !

We waiting for it and thanks insted.

Dimitri PD1DL

9
General discussion / Re: Exactly what is wrong!
« on: 2011-11-19, 17:51:06 »
I facing the same problem here and thats the reason i came for help to the forum. I have two Yaesu FT 2000D radio`s buth i whas planning to loggon sometimes with my labtob using the RRC micro. Search the last 2 days for a solution to set the radio remote ON/OFF with my labtop and RRC Micro. I thought that i made a mistake somewhere with te settings buth just read that it is not posseble to switch the radio ON/OFF with the RRC micro. Hopefully there ll be comming a solution. If not i ll probely sell the FT 2000D`s for a other system.

Dimitri  PD1DL

Pages: [1]